Compact Datalogger

Data register and analysis with Smartyplanet


The SPC300 datalogger is specifically designed for monitoring and remote control of hydrological, meteorological, environmental and industrial applications.

You can take analog or digital sensor data. This data is registered and analyzed by the Smartyplanet web platform thanks to its full compatibility.

The most outstanding advantage of this data logger is that it has automated decision making.



Catégorie :


The SPC300 is a compact multi-purpose measurement and control data logger ideal for small applications requiring long-term monitoring and remote control.
This entry-level data logger can measure most hydrological, meteorological, environmental, and industrial sensors. It concentrates the data that makes available through varied networks and the delivery through the protocol that is wanted.
SPC300 series dataloggers also make automated on-site or remote decision making for M2M control and communications.
  • Environmental monitoring.
  • Water monitoring.
  • Many others.
  • Set up easily with PC software and USB connectivity.
  • Measure with confidence analog and digital sensors.
  • Internet reasy-email, FTP, HTTP/Web, TCP-with required add-ons.
  • Includes integral surge and ESD protection.
  • Network wiressly to another node or Internet gateway with integrated radio option.
  • Communicate from anywhere when using cellular or satellite peripheral.
  • SR300-WiFi ideal for short-range, wireless IP communication.
  • Integrated 12V battery solar charge regulator.
  • Measure smart sensors using RS232 or SDI-12.
  • Connect with PakBus, ModBus, DNP3, GOES and other standard communication protocols.
  • Analyze and control with programmability and multiple general purpose I/O.
  • Notify with event-driven communications and physical outputs.


CPUARM Cortex M4, running at 144 MHz
Internal memory30 MB flash for data storage
80 MB flash for CPU drive/programs
2 MB flash for operating system
Clock accuracy±1 min per month
USB microFor direct connection to PC
RS232For connecting RS232 modems or serial sensors
10/100 Ethernet RJ45For LAN connection
One switched 12V terminalFor powering sensors or communication devices, 1100@20ºC
Two sensor excitation or continuous 0,15 to 5V terminalFor sensor excitation or output control
Six multipurpose analog input terminalsAnalog functions (SE1-SE6)
Digital I/O functions (SE1-SE4)
Two pulse counting terminalsP_SW: 150 Hz or 35 kHz
P_LL: 20 kHz
Battery terminal pairFor regulated 12V power input or rechargeable 12V VRLA for UPS mode
Charge terminal pairFor 16 to 32V from dc power converter or 12 or 24V solar panel (10W)
Power consumption1,5 mA (sleep)
5 mA (1 Hz scan with one analog measurement)
23 mA (active processor always on)
Two control terminalsC terminals are spftware configurable for digital functions
Best analog accuracy±(0,04% of reading ±6 µV), 0º to 40ºC
Best effective resolution0,23 µV (rango de ±34 mV range, differential measurement, input reversal, 50/60Hz)
Operating temperature range-40 to +70ºC
WeightSPC300: 242g
SPC300-WiFi/RF412/RF422: 249,5g
Dimensions14 x 7,6 x 5,1 cm

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

Aviso de cookies